TOOLS FOR PC ASSEMBLY

                                                 Screwdrivers and nut drivers.

You should have available, at a minimum, small- and medium-sized Phillips and flat screwdrivers and a 1/4" nut driver.

                                                        Needle-Nosed Pliers

Very small needle-nosed pliers are very handy for removing and inserting jumpers on motherboards and hard drives. (A pair of tweezers or surgical forceps also works well for this purpose.)

                                                                 Cable Ties

Plastic cable ties are useful for neatly bundling wires and cables away from fans and other components inside the computer. If you can't find them, electrical tape is an acceptable substitute.

                                                       Anti-Static Wrist Strap

This provides extra static protection, and also protects your tabletop from scratches.

                                                        Heat Sink Compound

This is usually included with processor fans, but may be purchased separately. It is applied neatly to the area where the processor contacts the heat sink to improve cooling efficiency.

                                                    Canned Air or Canless Air

Compressed air is used to blow dust out of the nooks and crannies of your computer. Never blow into a computer with your lips to remove dust.

Line tester

Tool which is used to identify or test the Phase/Live/Hot or Positive wire/Conductor.

If I were a tool I would be a Cable Ties because it is useful for neatly bundling wires and cables. Just like me, I am also neat in all things especially in my own important things. We should be neat so that we can find important things easily. We should be neat so that our place or room will be clean at all times. Also in computer we should be neat specially on the cables that are connected into the CPU.